Soubor:Welding wire feeder-Miller-D60-side-triddle.jpg

Obsah stránky není podporován v jiných jazycích.
Z Wikipedie, otevřené encyklopedie

Původní soubor(1 712 × 1 341 pixelů, velikost souboru: 860 KB, MIME typ: image/jpeg)

Popis
English: This is a picture of the side of a Miller D60 welding wire feeder. As pictured the wire feeder is configured for .052 inch (1.3 mm) Flux Cored Arc Welding. This side view exposes the drive rollers which grip the wire and feed it through the cable and welding gun. In this picture the cable and gun are missing and instead the wire simply hangs free from the location where the cable would be connected. The blue box with the Quimby sticker is a Miller XMT 305 CC/CV power source which supports GMAW, SMAW, and GTAW.
Zdroj English Wikipedia, original upload 26 February 2005 by Triddle en:Image:Welding wire feeder-Miller-D60-side-triddle.jpg
Credits: Photograph taken by Triddle in the Clark College (Washington) welding lab on February 25, 2005.
Autor Triddle


Držitel autorských práv k tomuto souboru dovoluje jeho užití pro libovolný účel včetně neomezeného šíření, komerčního využití a úprav.

Poznámka:
Pokud je vyžadováno uvedení autora, použijte místo této šablony {{Attribution}}.
Pokud je obrázek vaším vlastním dílem, zvažte raději použití {{PD-self}}.

Popisky

Přidejte jednořádkové vysvětlení, co tento soubor představuje

Položky vyobrazené v tomto souboru

zobrazuje

Historie souboru

Kliknutím na datum a čas se zobrazí tehdejší verze souboru.

Datum a časNáhledRozměryUživatelKomentář
současná16. 9. 2005, 21:13Náhled verze z 16. 9. 2005, 21:131 712 × 1 341 (860 KB)Saperaud~commonswiki==Overview== This is a picture of the side of a Miller D60 welding wire feeder. As pictured the wire feeder is configured for .052 inch (1.3 mm) Flux Cored Arc Welding. This side view exposes the drive rollers which grip the wire and feed it through t

Tento soubor používá následující stránka:

Globální využití souboru

Tento soubor využívají následující wiki:

Metadata